收藏本站
HPC Series
High Power Surface Mount Resistor
Stackpole Electronics, Inc.
Resistive Product Solutions
High Power Chip Resistors and Thermal Management
Stackpole has developed several surface mount resistor series in addition to our current sense resistors,
which have had higher power ratings than standard resistor chips. This has caused some uncertainty and
even confusion by users as to how to reliably use these resistors at the higher power ratings in their designs.
The data sheets for the RHC, RMCP, RNCP, CSR, CSRN, CSRF, CSS, and CSSH state that the rated
power assumes an ambient temperature of no more than 100 degrees C for the CSS / CSSH series and 70
degrees C for all other high power resistor series. In addition, IPC and UL best practices dictate that the
combined temperature on any resistor due to power dissipated and ambient air shall be no more than 105C.
At first glance this wouldn’t seem too difficult, however the graph below shows typical heat rise for the CSR
? 100 milliohm at full rated power. The heat rise for the RMCP and RNCP would be similar. The RHC with
its unique materials, design, and processes would have less heat rise and therefore would be easier to
implement for any given customer.
The 102 degrees C heat rise shown here would indicate there will be additional thermal reduction techniques
needed to keep this part under 105C total hot spot temperature if this part is to be used at 0.75 watts of
power. However, this same part at the usual power rating for this size would have a heat rise of around 72
degrees C. This additional heat rise may be dealt with using wider conductor traces, larger solder pads and
land patterns under the solder mask, heavier copper in the conductors, vias through PCB, air movement, and
heat sinks, among many other techniques. Because of the variety of methods customers can use to lower
the effective heat rise of the circuit, resistor manufacturers simply specify power ratings with the limitations
on ambient air temperature and total hot spot temperatures and leave the details of how to best accomplish
this to the design engineers. Design guidelines for products in various market segments can vary widely so it
would be unnecessarily constraining for a resistor manufacturer to recommend the use of any of these
methods over another.
Note:
The final resistance value can be affected by the board layout and assembly process, especially the size of the
mounting pads and the amount of solder used. This is especially notable for resistance values ≤ 50 m ? .
This should be taken into account when designing.
Rev Date: 02/10/2012
This specification may be changed at any time without prior notice
Please confirm technical specifications before you order and/or use.
4
www.seielect.com
marketing@seielect.com
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
HPC12JB5R10 RES 5.1 OHM 5W 5% SMD
HPC12JB2R00 RES 2.0 OHM 5W 5% SMD
HPC12JB1R00 RES 1.0 OHM 5W 5% SMD
HPC12JBR500 RES .5 OHM 5W 5% SMD
HPC12JB250R RES 250 OHM 5W 5% SMD
HPC12JB100R RES 100 OHM 5W 5% SMD
HPC12JB50R0 RES 50 OHM 5W 5% SMD
HPC12JB47R0 RES 47 OHM 5W 5% SMD
相关代理商/技术参数
HPC12JB50L0 功能描述:RES .05 OHM 5W 5% SMD RoHS:是 类别:电阻器 >> 芯片电阻 - 表面安装 系列:HPC 标准包装:1,000 系列:TNPU - 汽车 电阻（欧姆）:133 功率（瓦特）:0.25W，1/4W 复合体:薄膜 特点:- 温度系数:±5ppm/°C 容差:±0.05% 封装/外壳:1206（3216 公制） 尺寸/尺寸:0.126" L x 0.063" W（3.20mm x 1.60mm） 高度:0.026"（0.65mm） 端子数:2 包装:带卷 (TR)
HPC12JB50R0 功能描述:RES 50 OHM 5W 5% SMD RoHS:是 类别:电阻器 >> 芯片电阻 - 表面安装 系列:HPC 标准包装:1,000 系列:TNPU - 汽车 电阻（欧姆）:133 功率（瓦特）:0.25W，1/4W 复合体:薄膜 特点:- 温度系数:±5ppm/°C 容差:±0.05% 封装/外壳:1206（3216 公制） 尺寸/尺寸:0.126" L x 0.063" W（3.20mm x 1.60mm） 高度:0.026"（0.65mm） 端子数:2 包装:带卷 (TR)
HPC12JB5R10 功能描述:RES 5.1 OHM 5W 5% SMD RoHS:是 类别:电阻器 >> 芯片电阻 - 表面安装 系列:HPC 标准包装:1,000 系列:TNPU - 汽车 电阻（欧姆）:133 功率（瓦特）:0.25W，1/4W 复合体:薄膜 特点:- 温度系数:±5ppm/°C 容差:±0.05% 封装/外壳:1206（3216 公制） 尺寸/尺寸:0.126" L x 0.063" W（3.20mm x 1.60mm） 高度:0.026"（0.65mm） 端子数:2 包装:带卷 (TR)
HPC12JB75L0 制造商:SEI Stackpole Electronics Inc 功能描述:RES 1/2W 0.075 OHMS 5% - Bulk 制造商:SEI Stackpole Electronics Inc 功能描述:Res 0.075 Ohm 5% 12W ±150ppm/°C Molded SMD Bulk
HPC12JB8R20 功能描述:RES 8.2 OHM 5W 5% SMD RoHS:是 类别:电阻器 >> 芯片电阻 - 表面安装 系列:HPC 标准包装:1,000 系列:TNPU - 汽车 电阻（欧姆）:133 功率（瓦特）:0.25W，1/4W 复合体:薄膜 特点:- 温度系数:±5ppm/°C 容差:±0.05% 封装/外壳:1206（3216 公制） 尺寸/尺寸:0.126" L x 0.063" W（3.20mm x 1.60mm） 高度:0.026"（0.65mm） 端子数:2 包装:带卷 (TR)
HPC12JBR100 功能描述:RES .1 OHM 5W 5% SMD RoHS:是 类别:电阻器 >> 芯片电阻 - 表面安装 系列:HPC 标准包装:1,000 系列:TNPU - 汽车 电阻（欧姆）:133 功率（瓦特）:0.25W，1/4W 复合体:薄膜 特点:- 温度系数:±5ppm/°C 容差:±0.05% 封装/外壳:1206（3216 公制） 尺寸/尺寸:0.126" L x 0.063" W（3.20mm x 1.60mm） 高度:0.026"（0.65mm） 端子数:2 包装:带卷 (TR)
HPC12JBR240 制造商:SEI Stackpole Electronics Inc 功能描述:RES 1/2W 0.24 OHMS 5% - Bulk 制造商:SEI Stackpole Electronics Inc 功能描述:Res 0.24 Ohm 5% 12W ±150ppm/°C Molded SMD SMD Bulk
HPC12JBR330 制造商:SEI Stackpole Electronics Inc 功能描述:RES 1/2W 0.33 OHMS 5% - Bulk 制造商:SEI Stackpole Electronics Inc 功能描述:Res 0.33 Ohm 5% 12W ±150ppm/°C Molded SMD SMD Bulk